Processing
Film – Quick Reference |
|
| Presoak – 1-3 minutes – tap water at 3-5 degrees of developer mixture – agitate 30 sec. | |
Developer–
dilution ratio + temperature + film speed = film manufacturers time recommendations – agitate first 30
sec. then, 5 sec. of every
30 seconds. Rap Tank following each agitation to release air
bubbles. |
|
Stop
Wash (Stop Bath) – fill tank with tap water – 30 sec.
to 1 minute - agitate continuously |
|
| Fixer– check film manufacturers recommendation (tri-x 5 min / tmax 6 min)agitate first 30 sec. then, 5 sec. every 30 sec. | |
| Wash – 10 minutes - continuous running water. | |
| Wetting Agent – photo-flo – 30 sec. or double dip |